SHM Related Publications Written by Metis Design Authors

1. Kessler S.S., Spearing S.M., Atalla M.J., Cesnik C.E.S. and C. Soutis. "Damage Detection in Composite Materials using Frequency Response Methods." Proceedings of the SPIE's 8th International Symposium on Smart Structures and Materials, 4-8 March 2001, Newport Beach, CA.(pdf)

2. Kessler S.S., Spearing, S.M. and C. Soutis. "Damage Detection in Composite Materials using Lamb Wave Methods." Proceedings of the American Society for Composites, 9-12 September 2001, Blacksburg, VA. (pdf)

3. Kessler S.S., Spearing S.M. and C. Soutis. "Optimization of Lamb Wave Methods for Damage Detection in Composite Materials." Proceedings of the 3rd International Workshop on Structural Health Monitoring, 12-14 September 2001, Stanford University. (pdf)

4. Kessler S.S. "Piezoelectric-Based In-Situ Damage Detection of Composite Materials for Structural Health Monitoring Systems." Massachusetts Institute of Technology, Ph.D. Thesis, January 2002. (pdf)

5. Kessler S.S., Spearing S.M., Atalla M.J., Cesnik, C.E.S. and C. Soutis. "Structural Health Monitoring in Composite Materials using Frequency Response Methods."Composites Part B, v.33, January 2002, 87-95. (pdf)

6. Kessler S.S., and S.M. Spearing. "Design of a PiezoElectric Based Structural Health Monitoring System for Damage Detection in Composite Materials." Proceedings of the SPIE's 9th International Symposium on Smart Structures and Materials, March 2002, San Diego, CA. (pdf)

7. Kessler S.S., Spearing S.M. and C. Soutis. "Structural Health Monitoring in Composite Materials using Lamb Wave Methods." Smart Materials and Structures, v.11, April 2002, 269-278. (pdf)

8. Kessler S.S., Spearing S.M. and C. Soutis. "Structural Health Monitoring of Built-up Composite Structures using Lamb Wave Methods." Submitted for publication to Journal of Intelligent Material Systems and Structures. (pdf)

9. Kessler S.S. and S.M. Spearing. "Structural Health Monitoring of Composite Materials using Piezoelectric Sensors." Submitted for publication to Materials Evaluation. (pdf)

10. Kessler S.S., and S.M. Spearing. "In-Situ Sensor-Based Damage Detection of Composite Materials for Structural Health Monitoring Systems." Proceedings of the AIAA/ASME 43rd SDM Conference, April 2002, Denver, CO. (pdf)

11. Kessler S.S., Spearing S.M., and M.J. Atalla. "In-Situ Damage Detection of Composite Materials using Lamb Wave Methods." Proceedings of the European Workshop on Structural Health Monitoring, 10-12 July 2002, Paris, France. (pdf)

12. Kessler S.S. and C.T. Dunn. "Optimization of Lamb Wave Actuating and Sensing Materials for Health Monitoring of Composite Structures." Proceedings of the SPIE's 10th International Symposium on Smart Structures and Materials, 3-6 March 2003, San Diego, CA.(pdf)

13. Kessler S.S., Johnson C.E. and C.T. Dunn."Experimental Application of Optimized Lamb Wave Actuating/Sensing Patches for Health Monitoring of Composite Structures." Proceedings of the 4th International Workshop on Structural Health Monitoring, 15-17 September 2003, Stanford University. (pdf)

14. Kessler S.S. and S.M. Spearing."Selection of Materials and Sensors for Health Monitoring of Composite Structures." Proceedings of the Materials Research Society Fall Meeting, 1-5 December 2003, Boston, MA. (pdf)

15. Kessler S.S., Spearing S.M., Shi Y. and C.T. Dunn."Packaging of Structural Health Monitoring Components." Proceedings of the SPIE's 11th International Symposium on Smart Structures and Materials, 14-18 March 2004, San Diego, CA. (pdf)

16. Kessler S.S., and D.J. Shim."Validation of a Lamb Wave-Based Structural Health MonitoringSystem for Aircraft Applications." Proceedings of the SPIE's 12th International Symposium on Smart Structures and Materials, 7-10 March 2005, San Diego, CA. (pdf)

17. Kessler S.S., Amaratunga K.S. and B.L. Wardle."An Assessment of Durability Requirements for Aircraft Structural Health Monitoring Sensors." Proceedings of the 5th International Workshop on Structural Health Monitoring, 12-14 September 2005, Stanford University.(pdf)

18. Kessler S.S."Certifying a Structural Health Monitoring System: Characterizing Durability, Reliability and Longevity." Proceedings of the 1st International Forum on Integrated Systems Health Engineering and Management in Aerospace, 7-10 November 2005, Napa, CA. (pdf)

19. Chambers J.T., Wardle B.L. and S.S. Kessler. "Durability Assessment of Lamb Wave-Based Structural Health Monitoring Nodes."  Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, May 2006, Newport, RI. (pdf)

20. Kessler S.S. and P. Rani. "Pattern Recognition for Damage Characterization in Composite Materials." Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 2007, Waikiki, HI. (pdf)

21. Kessler S.S. and P. Agrawal. "Application of Pattern Recognition for Damage Classification in Composite Laminates." Proceedings of the 6th International Workshop on Structural Health Monitoring, 11-14 September 2007, Stanford University.(pdf)

22. Kessler S.S. and P. Agrawal. "Adaptive SHM Methodology to Accommodate Ageing, Maintenance and Repair." Proceedings of the 6th International Workshop on Structural Health Monitoring, 11-14 September 2007, Stanford University.(pdf)

23. Chambers J.T., Wardle B.L. and S.S. Kessler."Lessons Learned from a Broad Durability Study of an Aerospace SHM System." Proceedings of the 6th International Workshop on Structural Health Monitoring, 11-14 September 2007, Stanford University.(pdf)

24. Kessler S.S. and P. Agrawal. "An Adaptive Pattern Recognition Methodology for Damage Classification in Composite Laminates." Proceedings of the American Society for Composites, 17-19 September 2007, Seattle, WA. (pdf)

25. Kessler S.S. and A. Raghavan. "Co-Located Triangulation: Single Node Damage Position Identification." Proceedings of the Sensors, Signal and Information Processing Workshop, 11-14 May 2008, Sedona, AZ. (pdf)

26. Kessler S.S. and A. Raghavan. "Vector-Based Localization for Damage Position Identification from a Single SHM Node." Proceedings of the 1st International Workshop on Prognostics & Health Management, 6-9 October 2008, Denver, CO. (pdf)

27. Kessler S.S. and A. Raghavan. "Vector-based Damage Localization for Anisotropic Composite Laminates." Proceedings of the 7th International Workshop on Structural Health Monitoring, 9-11 September 2009, Stanford University.(pdf)

28. Dunn C.T., Raghavan A. and S.S. Kessler. "Analytical Axisymmetric Coupled Piezo-Elastodynamic Models for Guided-Wave Structural Health Monitoring." Proceedings of the 7th International Workshop on Structural Health Monitoring, 9-11 September 2009, Stanford University.(pdf)

29. Raghavan A., Kessler S.S., Dunn C.T., Barber D., Wicks S. and B.L. Wardle."Structural Health Monitoring using Carbon Nanotube (CNT) Enhanced Composites." Proceedings of the 7th International Workshop on Structural Health Monitoring, 9-11 September 2009, Stanford University.(pdf)

30. Kessler S.S., Dunn C.T., Borgen M., Raghavan A.,Duce J. and D.L. Banks. "A Cable-Free Digital Sensor-Bus for Structural Health Monitoring of Large Area Composite Structures." Proceedings of the 1st Annual Conference of the Prognostics and Health Management Society, 28-30 September 2009, San Diego, CA. (pdf)

31. Wicks S., Barber D., Raghavan A., Dunn C.T., Daniel L., Kessler S.S. and B.L. Wardle. "Health Monitoring or Carbon NanoTube (CNT) Hybrid Advanced Composite for Space Applications." Proceedings of the 11th European Conference on Spacecraft Structures, Materials and Mechanical Testing, September 2009 Toulouse, France.(pdf)

32. Barber D., Wicks S., Wardle B.L., Raghavan A., Dunn C.T. and S.S. Kessler. "Health Monitoring of Aligned Carbon Nanotube (CNT) Enhanced Composites." Proceedings of the SAMPE Fall Technical Conference, 19-22 October 2009, Wichita, KS.(pdf)

33. Wicks S., Guzman deVilloria R., Raghavan A., Kessler S.S. and B.L. Wardle "Health Monitoring of Aligned Carbon Nanotube (CNT) Enhanced Composites." Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 2010, Orlando, FL. (pdf)

34. Kessler S.S., Raghavan A., Dunn C.T., Wicks S., Guzman deVilloria R., and B.L. Wardle "Fabrication of a Multi-Physics Integral Structural Diagnostic System Utilizing Nano-Engineered Materials." Proceedings of the 2nd Annual Conference of the Prognostics and Health Management Society, 10-16 October 2010, Portland, OR. (pdf)